How can I save electricity: simple recommendations that always work
It takes months, paying the services bills, each of us comes to my mind on how to save electricity.
After all, such an article of expenditure is one of the most basic in the average family budget.Housing fees and utilities are increasing year by year, so this question is very important.
Proper use of lighting products
Where to start saving?Experts recommend replacing standard pallor switches.Such devices allow you to adjust the level of light.
After all, few people need a constant source of bright light in the kitchen, bedroom, toilet or bathroom.As a rule, there is quite a small power.
This is especially true for situations when you just enter the room for a minute, watch a movie or play computer games.
You can continue to save by simply replacing ordinary incandescent bulbs with LEDs.They contribute to much less energy consumption.
As for the energy saving lamps, despite the fact that they also contribute to the reduction of electricity costs, not all experts recommend them.
The fact is that in their production, manufacturers use mercury.
Moreover, such bulbs give unnatural light, which may not affect vision in the best way and significantly reduce its sharpness.Moreover, their service life is not as reliable as LED.
Despite the fact that the latter are quite high, they will soon pay.Using them, you can save on payments.
For example, a 4 W lamp will be 16 times more economical than a standard incandescent lamp of 75 watts.And it will give Sveta exactly the same amount.
Therefore, it is better to spend money on the LED lamp once than to pay several times more.
Moreover, according to their production companies, their validity period is approximately 30,000 hours.In the average time of the work process, 4 hours a day, such a lighting portion is enough for more than ten years!
In addition, they are safer than ordinary fire because they are almost not heated.Consider buying them as long -term investments and investments and they will pay more than.
You can save electricity by increasing the number of light sources around the entire perimeter of the apartment.
In this case, it will be easy to adjust the lighting that is needed.For example, it is not necessary to light the light throughout the bedroom or kitchen if you need to light the table.
It is enough to turn on the wall scons or a desktop lamp.
How to use the technique correctly?
The correct choice of electrical equipment and equipment will help to significantly minimize the cost of light:
- Remember that in stores you have to choose a "A" class technique of energy consumption.This letter means that iron, refrigerator, microwave, etc.Consumes a small amount of electricity.Also, class "B" is not inferior to it.A big mistake will be to acquire equipment with class "G", as it is more energy.
- The size of the equipment should be selected depending on how many family members live in the apartment.For example, if the family consists of two people, do not buy a 5 kg loading machine.In addition, in this case, you will have to spend extra kilowatt of electricity, starting a semi -sensitive unit.This also applies to buying a powerful refrigerator, which is not needed in a two -person family.
Fully disconnect electrical equipment if you do not use them for a period.Remember that a fork from a nest should always turn off after the device!This is due to the fact that home appliances consume electricity even in standby mode.Spend the same manipulations with charges for phones, laptops and other devices.
Proper use of the refrigerator to get rid of unnecessary expenses
When choosing a refrigerator in the store, give preference to what has no frost function.A technique with a similar sign will significantly reduce electricity consumption.
It is better to put the refrigerator in the coldest place in the kitchen.Installing such an element of equipment near the stove will be wrong.It is recommended to place it on the outside of the room.
Is what is always bigger than others.This will allow the refrigerator not to heat up.
As for the refrigerator, it is best to keep it full of products.This supports the given electrical engineering temperature is normal.
In addition, make sure the refrigerator and refrigerator door are always in a closed state.
There is no need to put hot drinks, soups and other liquids on the refrigerator shelves.Leave the food on the tiles, pots or in a pan to cool on your own.It is free and you do not need to spend power, and by compliance with the additions pay additional kilowatts spent.It should be remembered that milk, juices, soups and other liquids should always be closed.Otherwise, the moisture will evaporate, which will cause energy consumption.
Kitchen tile will help to save
When buying an apartment, buy what is equipped with a gas stove.Preparing food in it is much more profitable than in that it works for electricity.
You can also reduce payment with admissions through using an induction stove.
It has the slightest energy consumption, as this home appliance is heated only at the bottom of the pan, boiler or dishes.And on the usual plates, the burner is heated.
In addition, remember that the diameter of the dishes for the preparation of different dishes should be slightly more than the burning or matching it.
This will allow you to get the best heat transfer due to an adjustment closer to the combustion.Cooking with a closed lid will help not rotate electricity.
This method will warm the food in the dishes, not the air in the kitchen.
Always turn off the stove 5 minutes before the dish is prepared.Cook at high temperature for initial heating, and then reduce it.
The dish will reach readiness and without the use of additional energy costs.
It is desirable to bring water to a boil to the gas, as a boiler that works from the network consumes a lot.In addition, when working, it is involved in very high power.
We bathe, iron and save
When choosing a mode of washing, remember that most powders contain special components at their base and rub well the interior at low temperatures.
Therefore, it is not necessary to set it the maximum.The same rule applies to big revolutions.In addition, do not start a semi -contaminated washing machine.It is better to store linen until it is fully charged.
The remaining heat can be used when ironed.To do this, 10 minutes before the completion of this procedure, turn off the iron.The device will be hot all this time.
Put the food paper on the ironing table.This will not spend electricity on heating its surface.
Other effective methods
The following recommendations will help minimize costs:
- When decorating the rooms (choice of furniture, paper -mourning, floors, painting ceiling and walls), give preference to light tones.After all, the more colorful colors the lighter, the more light is reflected.In addition, to get a normal level of lighting, you will need much less electricity.
- The next recommendation will be banal, but with its help you can also greatly reduce the costs of the bills.To save electricity, you need to wash the windows more often (depending on the degree of their pollution).The fact is that the contaminated glass always passes almost half the sun and the natural light.As a result, it is necessary to configure high power pale.The lamp should also be wiped out at least 2 times a month.In this case, everything will depend on the degree of pollution.
- If you are going to buy shelter, consider that the southern side is brighter.This means that during the day there will be no additional lighting.
- Before turning on the partition systems or air conditioners, you need to make sure there are no home designs.Otherwise, such a technique will warm the road, not the room.Choose air conditioners, based on room size.This will pay for the light much less.In order to turn on the heater as little as possible, you can place windows from plastic.Despite the fact that this pleasure is not free, over the years it will pay completely.
An outdated TV or computer monitor has been best changed for the newest (LED, etc.).In the old style technique there is a great level of energy consumption.
Modern technique consumes very little electricity.Also do not light the scanner, the printer is unnecessary.